pb r ohs compliant b.014 [ .35] .020 .002 0.50 0.05 a .010 [ .25] .079 .002 2.00 0.05 .079 2.00 .142 .008 3.60 0.20 .110 .008 2.80 0.20 .079 .002 2.00 0.05 .157 4.00 a .008 [ .10] .079 .002 2.00 0.05 .079 .002 2.00 0.05 .031 .002 0.80 0.05 recommended pcb layout 02-20, 0.20mm max. 21-30, 0.30mm max. 31-40, 0.40mm max. notes: 1. insulator material: see part number coding. 2. contact material: brass. 3. contact plating: gold flash overall. 4. current rating: 1 amp. 5. voltage rating: 150v ac/dc. 6. insulator resistance: 5000 megohms min. 7. contact resistance: 20 milliohms max. 8. dielectric withstanding: 500v ac. 9. operating temperature: -40 c to +105 c. 10. *processing temp.: 260 c for 10 secs max. *indicated temperature and time is for component insulator. higher processing temperatures may be used, provided heat is applied from back side of pcb, and insulator does not exceed indicated temperature and time. revisions rev. eco. no description date by c 857 dwg # 10637 was t0030, add rohs & -rc on p/n 12/12/2005 ych d 857 add part no. coding 12/12/2005 ych e 1811 update p/n coding, posi. chart, tolerance, add pcb layout 1/15/2009 jh f 2024 head height 3.60mm was 4.00mm, update warp tolerance 9/15/2009 jh d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 e f e f dimensions are in inches[mm] tolerances: angular: 5 .xx= .01 [.2] .xxx= .006 [.15] surface finish: 63 ra remove all burrs and sharp edges .010 max interpret dimensions and geometric tolerancing per: ansi y14.5m-1994 unless otherwise specified: date name drawn size c dwg. no. rev sheet 1 of 1 scale: 12:1 jh 10637 f the information herein contains propietary information of sullins electronics and is not to be reproduced, used or disclosed to others for any purpose except as specifically authorized in writing by an officer of sullins electronics. header, male 2mm cc, 2 rows, st nrpnxx2paen-rc file name: z:\eco pending\2024\10637, nrpnxx2paen-rc print: 11/24/2009 description 1/13/09 part number
|
